Water jet pump - Polypropylene (PP)

With very good properties, suction capacity and technical data due to optimum flow geometry. Pump with integrated non-return valve.
Low water consumption: at a water pressure of 3.5 bar, consumption approx. 170 l/h. For example, only approx. 6 litres of water are required for the evacuation of a 1-l container.
Technical data: 400 l/h suction capacity, final pressure 16 mbar.
Chemical-resistant. Pump made entirely from plastic, robust and dimensionally stable. Easy to clean and easy to handle. Continuous operating temperature up to a max. of +80°C. Connection data: on the delivery side, for water with ½'' or ¾''coupling nuts or by means of a hose nozzle with an exterior Ø 10-12 mm; on the suction side, hose nozzle with an exterior Ø 6-8 mm.