For effortless spraying of large volumes of liquid without interruption. An ideal device for disinfection, crop protection, car maintenance and cleaning, and for many technical purposes. The pressure in the liquid container is built up by pumping, whereby the pressure is brought up to 2-3 bar. Light thumb pressure on the spraying lever is sufficient to achieve continuous atomisation, the fineness of which can be regulated by turning the nut. The atomiser consists of a thick-walled hard polyethylene bottle which stands up well. Plastic spray head with brass nozzle and safety valve.
Important: Only full the liquid container to the maximum mark, screw the spray head tightly onto the container. Seal must be present. If not used for a long time, the pump piston runs somewhat roughly, it should therefore be operated slowly.
Resistance:
For many ph-neutral water-based liquids, silicone oils and typical pesticides
Technical information:
Maximum operating pressure: 1.0 and 1.2 lt 3.0 bar; 1.5 and 1.8 lt 4.0 bar
Spray length with solid steel: 4 m
Spray angle with fine atomisation: 60°
Maximum operating temperature: -5°C to +30°C
