Safety body shower with eye shower

Body safety shower with eye shower, for floor mounting. Free-standing emergency shower combinations are always used when wall mounting of the shower is not possible or when a central point of contact for first aid is to be created. With the integrated eye shower, rapid first aid can also be provided in the event of an injury to the eyes. It also makes sense to use it in large halls and production facilities. A great advantage is the good visibility of the shower from all sides.

Product features:

• Including upper and lower water connection 1 1/4-inch IG for installation in circulation lines, plug 1 1/4-inch made of stainless steel.
• Stand with 4 fixing holes made of stainless steel, chemical-resistant green powder-coated, diameter 200 mm
• Standpipe 1 1/4-inch stainless steel, three-part, chemical-resistant green powder-coated, with upper and lower water connection 1 1/4-inch-IG, total height 2330 mm
• Connecting piece made of stainless steel, for quick assembly on site and easy alignment of the shower arm
• Ball valve 3/4 inch made of brass, with quick mounting system and pull rod actuation, DIN-DVGW tested and approved
• Pull rod with ring handle made of stainless steel, chemical-resistant green powder-coated, length 700 mm
• 3/4-inch stainless steel wall-mounted shower arm, chemical-resistant, green powder-coated, projection 630 mm
• Integrated automatic flow regulator 50 litres / minute for a standard-compliant spray pattern at a specified working range of 1.5 to 3 bar flow pressure
• High-performance shower head made of chemical-resistant plastic, black, with improved spray pattern, corrosion-resistant, largely free of limescale and maintenance, very robust, self-draining
• Information sign for body safety shower in accordance with DIN EN ISO 7010 and ASR A1.3, self-adhesive PVC film, dimensions 150 x 150 mm, recognition range 15 metres
• Integrated ClassicLine safety eye shower with two 45° shower heads, mounting height 900 mm, orientation of eye shower freely selectable on site
• Stainless steel connection pipe for easy installation and alignment of the shower, chemical-resistant green powder-coated, 3/4-inch threaded water connection
• Ball valve 1/2-inch stainless steel, with PUSH lever operation, DIN-DVGW tested and approved
• Control panel made of steel, chemical-resistant green powder-coated, length 130 mm, with large signal "PUSH", photoluminescent according to DIN 67510
• Integrated automatic flow regulator 14 litres / minute for a standard-compliant spray pattern with a specified working range of 1.5 to 5 bar flow pressure
• wide-jet, high-performance spray heads angled 45°, with plastic spray plate, low limescale, incl. rubber protection and tight-fitting dust cover with hinged mechanism, mounted over distribution fork
• sign for eye shower according to DIN EN ISO 7010 and ASR A1.3, self-adhesive PVC foil, dimensions 100 x 100 mm, recognition range 10 metres
• according to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717
• according to ANSI Z358.1-2014, DIN EN 15154-1:2006, DIN EN 15154-2:2006 and DIN EN 15154-5:2019
• DIN-DVGW tested and approved